Test Equipment

Your product needs to be of the highest quality: reliable, sustainable and safe. By using Mevi’s test equipment, you can be absolutely sure you’re playing safe. We keep up to date with the most recent rules and regulations, and continually invest in our knowledge of the very latest test methodologies. Based on all of this, and in our capacity as system integrator, we produce test equipment that gives you total certainty. Equipment that you can manage perfectly well yourself. Or which Mevi can use to carry out your tests in-house.

CERTAINTY WITHOUT LOSS OF TIME

Do you require a specific piece of testing apparatus that has to be specially developed for your particular product? Mevi will naturally take on this challenge too. In order to keep up the pace during your project, we set up the entire process in the smartest possible way. To start with, a feasibility test takes place at an early stage. We use a separate prototype to assess the feasibility of the complete project and the technical lifespan of the components. In parallel to this, we start up the development process. We can thereby guarantee you a reliable market introduction without loss of time.

Like to know more about our test equipment?

Please contact us


Test Equipment

No cases found.

ULTRA-PRECISE, ROTATING-BEAM FATIGUE TOOL

  • Fatigue test for materials whereby a varying bending load is applied
  • Moment of flexure adjustable between 1.5 Nm and 25 Nm
  • Maximum admissible angular rotation of sample under a 2-degree load
  • Test frequency adjustable up to 200 Hz
  • High-precision bearing blocks with low-friction, maintenance-free spindle bearings
  • High-speed brushless servomotor & drive for precise speed regulation

Contact us

LOW-FORCE FATIGUE TEST TOOL

  • For carrying out lifespan tests on components or sub-assemblies
  • Power or position regulation
  • Power in continuous operation: 100 N at a displacement of 15 mm
  • Typical test frequency: 10 to 200 Hz
  • Data logging from load cell and encoder values
  • Maintenance-free due to flexible suspension

Contact us

QUALIFICATION TOOL FOR SPECIAL SAMPLES

  • For carrying out qualification tests on components or sub-assemblies
  • System pressure: 9 bar
  • Liquid stream: 3 l/min
  • Constant water temperature: 25 °C
  • Typical test frequency: 1-5 Hz
  • Data logging of temperature, pressure and liquid stream
  • Leak detection via sensors
  • Monitoring with camera inspection system

Contact us

HIGH-FORCE FATIGUE TEST TOOL

  • For carrying out lifespan tests on components or sub-assemblies
  • Power or position regulation
  • Direct drive mode with a power in continuous operation of 1000 N at a displacement of 15 mm
  • Hinged mode with a power in continuous operation of 5000 N at a displacement of 3 mm
  • Typical test frequency : 10 to 100 Hz
  • Data logging of load cell and encoder values
  • Maintenance-free due to flexible suspension

Contact us